'Low Tide' Sculpture - cold cast bronze/verdigris finish, numbered edition

'Low Tide' Sculpture - cold cast bronze/verdigris finish, numbered edition

$2,072.78

Shipping to United States: Free

https://www.etsy.com/uk/shop/KaraSanchesSculpture?ref=seller-platform-mcnav

Cold cast bronze/verdigris and resin sculpture
Can also have bronze with no verdigris

Numbered edition.

Moulded and cast by my family's business at LSSculptureCasting.com
Have a look at the website to see more about the sculpture moulding and casting process.

Each sculpture has been hand made and finished to order and will have a 'Certificate of Authenticity' signed and numbered by the artist supplied with the finished sculpture. The edition number will also be engraved on the sculpture by hand.
It is mounted on a 30cm x30cm x3cm slate base.

Weight: Approximately 12kg
Finish: Cold cast bronze with resin
Size: height is 56cm and width 56cm and depth 30cm

The 'Low Tide' sculpture encapsulate the texture of the rippled sand as the tide moves out. It reveals tumbled shells and pebbles that have wonderful textures. I've incorporated some I have found with the multiple of little holes and etched in rough lines, creating a pleasing pattern next to the smoother surface.

I create my sculptures first in clay and sometimes plaster, from my little garden studio where I live in the seaside city of Brighton & Hove, UK. They then go to my families casting studio (LSSculptureCasting.com) to be a cold cast in bronze and resin. These sculptures are of the highest quality finish and great care and time is taken to achieve this.


Frequently asked questions

Q. Can it be used as a garden sculpture?
A. Yes the sculpture is completely frost-proof making it suitable for the garden. Due to the almost solid bronze outer layer, it does react with the weather and can, as solid bronze, develop verdigris. This can be cleaned off very gently if required by using a small "wash up" sponge with a rough side to it. This will highlight the metal.

Q. What about after care?
A. Do not use strong detergents or chemical cleaners, as this will destroy the surface. If placed outside is advisable to polish the sculpture with pure bees wax once a year.

Q. Ordering sculptures?
A. Ordering an additional sculpture in bronze or another finish such as aluminium or rusted iron for example has a lead-time of 6 weeks.

Please don't hesitate to message me for further information: Kara [!at] Sanches.com

Payments

Once payment has been received work will then start on your sculpture.

Shipping from United Kingdom

Please message me a contact number to pass onto the courier.
Once ready the sculptures are packed extremely well and couriered to the customer. For the UK this is a a standard courier delivery which normally arrives between 9am and 6pm on the agreed delivery day. You will be contacted to arrange the preferred day but there is no specific time.
If you would like a timed or special delivery such as next day either AM or PM then please select this delivery option. Message me your delivery preference. I will require a contact number so that arrangements for delivery can be made.

Returns & Exchanges

I gladly accept returns, exchanges, and cancellations

Just contact me within: 7 days of delivery

Ship items back to me within: 14 days of delivery


Q. What about aftercare?
A. Do not use strong detergents or chemical cleaners, as this will destroy the patination. It is advisable to polish them with pure bees wax once or twice a year. Brush on the wax from the tin, leave for 5 minutes before gently buffing.

Securing the sculpture

The sculptures are made with a threaded rod screwed into the base and cemented in. This is then bolted onto the slate base if provided with the sculpture.
The sculpture can be fixed using an extra long bolt to be attached to a pedestal, however this needs to be requested.
However if the slate base is placed on a flat non porous surface, I recommend securing it with Museum Wax, which will stop it from being knocked off.
With a spatula scoop out 4 large blobs and simply put them on the surface and push down the slate base and sculpture, giving it a wiggle to position it.

3cm slate bases

I supply 3cm thick slate bases either 30cm, 20cm or 17cm with my sculptures, which have a hole in the middle 1cm and countersunk on the underside by 1.5cm deep (for the nut attachment) by a diameter of 3cm.

Displaying sculptures - pedestals/plinths

Useful information about how to display your sculpture can be found here:
https://www.forging-ahead.co.uk/Plinths.htm

Some photos show my sculptures displayed on slate-affect planters that have been turned upside down and used as pedestals. They are relatively inexpensive and you can find a variety of stone finishes and sizes. They are also easy to move around. One customer placed a tile, matching in size and colour, on top of an upturned planter to display their sculpture, which looked great. https://www.primrose.co.uk/planters

Pedestals and plinths

Here are a few links to pedestals that I have found on the internet, however I'm not able to endorse them. Just copy and paste :-)

-Grey cement pedestal - 100cm x 28cm x 28cm
https://www.maisonsdumonde.com/UK/en/p/charcoal-grey-pedestal-mineral-mineral-130257.htm


-MDF display pedestals, ready to paint:
//www.greatart.co.uk/gerstaecker-display-plinths.html

- Solits Plinths
https://www.plinths.co.uk/11-plinths

More plinths and pedestals can be found on Etsy.

Legal imprint